Xterra ARB Awning Mount

8/1/2017

We haven't seen many ARB awnings mounted on Xterras so we thought we'd share how we mounted ours. Scouring the forums for hours we finally came across one that seemed like it would be inexpensive (not needing to buy overpriced mounts or new roof rack) and solid enough for off-road use. Basically, the mount uses 3 L brackets and 3 muffler clamps, along with the hardware that came with the awning. FYI, the awning is an ARB 2000 awning.

Step One: Paint

Step Two: Mount

Step Three: Enjoy

4 Comments

J Hartso

8/1/2018 04:05:47 pm

Thank you for posting your ARB awning mounting experience. I couldn't find anything on the net about mounting one on an Xterra factory rack before running across your blog post. It was spot on and I was able to easily mount my ARB awning using your recommendations.
The only thing I would add for anyone else, is that the muffler clamps need to be 2 1/4" diameter and the L brackets should be 5". Also, the L brackets will need to be drilled out with a 3/8" metal bit in order to fit the muffler clamp. I also added both a flat washer and lock washer to where the ARB square head bolts (provided) attach to the L brackets in order to give it a little more strength.

essay writing help service link

2/12/2020 05:30:52 am

This land is just the best. I have been to lots of places in the past, but I haven't been to a place like this. I feel like there are lots of great things to see here, and I am just happy that I am here today. I am writing this blog just before I go to sleep. I was so excited that I just had to write this, thank you for the great suggestion, it really made my week.

David F

5/20/2019 05:35:54 pm

BRILLIANT!!

Stephen Poulsen

6/10/2019 06:52:52 pm

Thank you sooooo much for the DIY design. I bought muffler clamps & 5” L bars...just need to find a machine shop that will drill the holes. Waiting for the ARB awning to be delivered. Thanks again

Our Stories